DPI1 – Picking Interface
Connectivity with other environments is available with the DPI1 interface. This powerful controller connects the displays with the software and the picking via ethernet.
Communications. The DPI1 encloses an ethernet port with a LAN8720 100Base-T and two leds showing the net activity. This interface has two communication channels with capacity for 250 displays per channel, up to 500 displays per interface. This component is easy to install. It can be placed in a DIN-5 track and it is connected to the displays by standard ethernet cables
IP Settings. It is possible to handly set the TCP/IP configuration by using the built-in keyboard.
Backup Settings. The DPI1 interface can use an standard SIM card in order to backup the facility setup data
Screen. Its embedded screen lets you change the ethernet settings and perform diagnosis
Web Server. It is used in setup tasks, maintenance and diagnostic. With an standard web browser you will be able to:
- Configurate: reassign the network ID, set up the node languages, change the interface TCP/IP parametres…
- Global test : See the node map, check the errors and failures and whole testing the facility.
- Single Test: Check a single display and verify if all its functions, buttons and output peripherics are working properly.
Digital outputs. The DPI1 has three digital outputs embedded which can be used to signalise some new picking wave, alarms or other working status.